Zotac G43-TX series, Руководство пользователя

Страница: 22 / 58

21
Configuring the BIOS
Date and Time
Using the arrow keys, position the cursor over the month, day, and year. Use the Page Up and
Page Down keys to scroll through dates and times. Note that the weekday (Sun through Sat)
cannot be changed. This field changes to correspond to the date you enter. Note that the hour
value is shown in a 24-hour clock format. Time is represented as
hour : minute : second
.
IDE Channel
Use these functions to detect and configure the individual IDE channels. Select a channel
and press Enter to display the IDE sub-menu. Press
Enter
to auto-detect IDE channels in
the system. Once the channel is detected, the values for Capacity, Cylinder, Head, Precomp,
Landing Zone, and Sector are automatically filled in.
q
None
There is no HDD installed or set.
q
Auto
The system can auto-detect the hard disk when booting up.
q
Manual
When you set the channel to
[Manual]
and change
Access Mode
to
[CHS]
, you can
then enter the number of cylinders, heads, Precomp, landing zone, and sector.
Video
Use this option to choose the mode of Video, as EGA/VGA, CGA 40, CGA 80, MONO.
Drive A
The Drive A option allows you to select the kind of FDD to install.
Halt On
Halt On
determines whether or not the computer stops if an error is detected during power on.
Use the
Page Up
and
Page Down
keys to scroll through the options or press
Enter
to display
the
Halt On
sub-menu. Use the
# $
arrow keys to position the selector in the option you
choose. Press
Enter
to accept the changes and return to the Standard CMOS Features menu.
q
All Errors
Whenever the BIOS detects a nonfatal error, the system stops and prompts you.
q
No Errors
System boot does not stop for any detected errors.
q
All, But Keyboard
System boot does not stop for keyboard errors, but does stop for all other errors.
q
All, But Diskette
The system boot does not stop for a diskette error but will stop for all other errors.
q
All, But Disk/Key
The system boot does not stop for diskette or keyboard error but will stop for all other errors.
Memory
These settings are display-only values that are determined by the BIOS POST (Power-On Self
Test).
q
Base Memory
BIOS POST determines the amount of base (or conventional) memory installed in the
system.
q
Extended Memory
BIOS determines how much extended memory is present during the POST.