zortrax Curing Station, Руководство пользователя

Страница: 19 / 24

©2022, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
19
Basic Maintenance and Service Work
Maintenance work should be regular in order to keep the device in good condition.
Some components require maintenance before each curing session and some every
few hundred working hours. All maintenance activities do not take much time and are
not complicated. Before commencing any repair, it is important to turn the device off
and let it cool down. Remember to always wear gloves and glasses.
The device is delivered with a full set of tools needed to carry out maintenance service
work.
The following tables present maintenance and repair guidelines connected with each
section of the Zortrax Curing Station, together with specific check points, necessary
activities and their frequency.
Activity Frequency Solutions to the problems Necessary accessories
Cleaning the machine,
its interior and sur-
roundings
Before each
printing
process
Remove dust and drops of resin
from the machine with paper
towels. If it’s necessary, use IPA.
-paper towels,
-IPA,
-safety gloves
1. Main