zortrax Curing Station, Руководство пользователя

Страница: 16 / 24

©2022, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
16
How to Cure a Print
Caution
Wear safety gloves during all procedures.
1. Make sure that the models you are about to cure have been cleaned properly and there is no liquid
resin on them.
2. Leave the models to air dry and ensure that they are not exposed to the UV light until they are completely
dry.