This product can be included and operated in any Z-Wave
network with other Z-Wave certified devices from other
manufacturers and/or other applications. All non-battery
operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
This product features the latest Security 2 (S2) framework to
remove smart home network hacking risks. This device is
equipped with a unique authentication code for trusted
wireless communication.
WARNING
COMMAND CLASSES
This device requires the following
command classes
to be
supported and recognized by your Z-Wave controller:
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_NOTIFICATION
COMMAND_CLASS_BINARY_SENSOR
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_BATTERY
COMMAND_CLASS_WAKE_UP
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SENSOR_MULTILEVEL
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_SECURITY
COMMAND_CLASS_TRANSPORT_SERVICE
COMMAND_CLASS_SUPERVISION
COMMAND_CLASS_FIRMWARE_UPDATE_MD
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_ZWAVEPLUS_INFO
S2
IN NO EVENT SHALL ZOOZ OR ITS SUBSIDIARIES AND AFFILIATES BE LIABLE FOR ANY
INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES, OR
DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR ANY
THIRD PARTY, WHE-THER IN AN ACTION IN CONTRACT, OR OTHERWISE EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DA-MAGES. ZOOZ'S LIABILITY AND CUSTOMER'S
EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING IN CON-NECTION WITH THIS
AGREEMENT OR THE SALE OR USE OF THE PRODUCTS, WHETHER BASED ON
NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY, BREACH OF AGREEMENT, OR
EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED TO, AT ZOOZ'S OPTION, REPLACEMENT
OF, OR REPAYMENT OF THE PURCHASE PRICE FOR THAT POR-TION OF PRODUCTS
WITH RESPECT TO WHICH DA-MAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING
IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL
BE DEEMED WAIVED UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS FROM ZOOZ'S
DELIVERY, OR THE DATE FIXED FOR DELI-VERY IN THE EVENT OF NONDELIVERY.
FCC NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS ONLY. DO NOT
IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used according to instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in any given installation.
If this equipment causes harmful interference to radio or television reception, the user
may try to correct the interference by taking one or more of the following measures:
- Reorient or relocate receiving antenna
- Increase the separation between equipment and receiver
- Connect equipment into a separate outlet or circuit from receiver
- Consult the dealer or an experienced radio/TV technician for additional assistance
All brand names displayed are trademarks of their respective holders.
© Zooz 2020
WARRANTY
This product is covered under a 12-month limited warranty.
To read the full warranty policy or file a warranty claim, please
go to ww.getzooz.com/warranty
2
0 FEET
100º
100º
1. MARK SCREW HOLES
Use the bracket to mark 2 mounting holes on a dry clean
surface 7 feet above ground. Skip this step if using tape.
2. INSTALL THE BRACKET
Drill holes and use the supplied
screws to fix the back cover to the wall.
3. MOUNT SENSOR
Attach the sensor to the back
cover by snapping it upwards.
Position the sensor to face
your desired coverage area.
Ÿ
This product should be installed indoors or outdoors in a
sheltered area upon completion of any building
renovations
.
Ÿ
Prior to installation, the device should be stored in a dry,
dust-and-mold-proof place
.
Ÿ
Do not install the device in a place with direct sun exposure,
high temperature
,
or humidity
.
Ÿ
Keep away from chemicals, water, and dust
.
Ÿ
Ensure the device is never close to any heat source or open
flame to prevent fire
.
Ÿ
No part of the device may be replaced or repaired by the
user except for the batteries.
PAGE
3
PAGE
4
Use the 2 screws included in the box to fix the mounting
bracket to a flat surface of your choice - at least 7 feet above
the ground for best results.
Alternatively, you can use the included adhesive tape to fix
the bracket to the wall if you’d like to avoid drilling holes.
A FEW TIPS:
Ÿ
The sensor best detects movement to the sides of the lens
rather than activity directly in front of it.
Ÿ
Use a standard phillips screwdriver to attach the
mounting screws.
Ÿ
Don’t position it facing a window, direct sunlight, or above
any source of heat (radiator, boiler, etc.).
MOUNTING
ADVANCED SETTINGS
Parameter 12: Adjust
motion sensitivity
where 8 is the most
sensitive setting.
Values: 0 - disable motion reports; 1-8. Default: 6.
Size: 1 byte dec
Parameter 13: Set
motion clear time
for the delay before the
sensor reports no motion to the hub and associated devices a er
detecting the last motion activity.
Values: 10-3600 (seconds). Default: 30.
Size: 2 byte dec
Parameter 19: Enable or disable
LED indicator for motion
alerts.
Values: 0 - don’t flash LED when motion is detected; 1 - flash LED
indicator when motion is detected (default).
Size: 1 byte dec
Parameter 172: Set
the reporting frequency for battery,
temperature, humidity, and light level.
This is the minimum
interval in which the sensor will send updates to the hub even if
the reporting threshold isn’t met. The values entered correspond
to the number of hours.
Note: Frequent reports will affect
battery life.
Values: 1 - 744 (hours). Default: 4 (hours)
Size: 2 byte dec
Parameter 183: Set
the reporting threshold for temperature.
The sensor will report new temperature value to the hub
whenever temperature changes by the number of degrees
entered as value.
Values: 1 - 144 (degrees Fahrenheit). Default: 1 (degree).
Size: 2 byte dec
Parameter 184: Set
the reporting threshold for humidity.
The
sensor will report new humidity value to the hub whenever
humidity changes by the percentage number entered as value.
Values: 0 - disable humidity reporting based on environmental
changes; 1-80 (%). Default: 5 (%).
Size: 1 byte dec
Parameter 185: Set
the reporting threshold for lux.
The sensor
will report new lux value to the hub whenever the brightness
level changes by the number of lux entered as value.
Values: 0 - disable lux reporting based on environmental
changes; 1-30000 (lux). Default: 50 (lux).
Size: 2 byte dec
Press and hold the Z-Wave button for 3 seconds to wake
the sensor up a er updating the settings.
We listed the most helpful settings above. For a complete list
of parameters, go to www.support.getzooz.com
The Q Sensor supports Group 1
with
5 nodes for lifeline
communication and Group 2 with up
5
for basic
to devices
on/off control
a Notification and Sensor
. This device will send
Multilevel Report
and Basic Set command to
to Group 1
Group 2
ever it detects motion.
when
ASSOCIATION
INDOOR ONLY!
This sensor may only be used and installed indoors.
Outdoor installation will void its warranty.
