How to read the LED indicator?
Slow blink = Mini Sensor is powered on and NOT included to Z-Wave network
Fast blink = Mini Sensor is in inclusion mode
Fast flash = Mini Sensor is powered on and included to Z-Wave network
Single flash = Mini Sensor indicates motion detection; sensor indicates successful factory
reset
MOUNTING
For best results, mount the sensor within 15 feet from the door and around 7 feet from the
ground. The Mini Sensor will detect motion up to 20 feet depending on mounting location
and sensitivity settings.
There are 2 ways to mount the Mini Sensor on the wall, ceiling, or in the corner of a room:
1. Use the supplied screws to fix the mounting bracket to flat surface of your choice. Carefully
insert the sensor to the mounting bracket. Position the sensor by directing it to the part of the
room you wish to monitor.
OR
2. Use supplied adhesive tape to fix the mounting bracket to a CLEAN flat surface of your
choice. Carefully insert the sensor to the mounting bracket. Position the sensor by directing it
to the part of the room you wish to monitor.
Motion Detection
Screw installation
Adhesive tape installation
13 feet
20 feet
8 feet
20 feet
