This product can be included and operated in any Z-Wave
network with other Z-Wave certified devices from other
manufacturers and/or other applications. All non-battery
operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
This product features the latest Security 2 (S2) framework to
remove smart home network hacking risks. This device is
equipped with a unique authentication code for trusted
wireless communication.
COMMAND CLASSES
This device requires the following
command classes
to be
supported and recognized by your Z-Wave controller:
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_TRANSPORT_SERVICE_V2
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_BATTERY
COMMAND_CLASS_CENTRAL_SCENE_V3
COMMAND_CLASS_SWITCH_MULTILEVEL_V4
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_WAKE_UP
COMMAND_CLASS_SUPERVISION
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5
S2
IN NO EVENT SHALL ZOOZ OR ITS SUBSIDIARIES AND AFFILIATES BE LIABLE FOR ANY
INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES, OR
DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR ANY
THIRD PARTY, WHE-THER IN AN ACTION IN CONTRACT, OR OTHERWISE EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DA-MAGES. ZOOZ'S LIABILITY AND CUSTOMER'S
EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING IN CON-NECTION WITH THIS
AGREEMENT OR THE SALE OR USE OF THE PRODUCTS, WHETHER BASED ON
NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY, BREACH OF AGREEMENT, OR
EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED TO, AT ZOOZ'S OPTION, REPLACEMENT
OF, OR REPAYMENT OF THE PURCHASE PRICE FOR THAT POR-TION OF PRODUCTS
WITH RESPECT TO WHICH DA-MAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING
IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL
BE DEEMED WAIVED UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS FROM ZOOZ'S
DELIVERY, OR THE DATE FIXED FOR DELI-VERY IN THE EVENT OF NONDELIVERY.
FCC NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS ONLY. DO NOT
IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used according to instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in any given installation.
If this equipment causes harmful interference to radio or television reception, the user
may try to correct the interference by taking one or more of the following measures:
- Reorient or relocate receiving antenna
- Increase the separation between equipment and receiver
- Connect equipment into a separate outlet or circuit from receiver
- Consult the dealer or an experienced radio/TV technician for additional assistance
All brand names displayed are trademarks of their respective holders.
© Zooz 2020
WARRANTY
This product is covered under a 12-month limited warranty.
To read the full warranty policy or file a warranty claim, please
go to ww.getzooz.com/warranty
PROGRAMMING
There are 2 ways you can use the Remote Switch to
control other Z-Wave devices in your network:
1. Scene Control:
Ÿ
Great to trigger preset scenes with multiple devices
Ÿ
Perfect for smart bulb control and non Z-Wave devices
Ÿ
Supports 1-tap, 2-tap, 3-tap, 4-tap, 5-tap, paddle held,
and paddle released for each paddle
2. Direct Association
Ÿ
Great to control other Z-Wave devices directly
Ÿ
Perfect for Z-Wave smart bulb control or as a virtual
add-on for existing Z-Wave switches and dimmers
Ÿ
Use only for Z-Wave devices included with the same
security level as your Remote Switch
Ÿ
Supports 1-tap for on/off control (Group 2) and
paddle held/released for dimming (Group 3)
Programming your Remote Switch using either of the
above methods will depend on the capabilities and
interface layout of your Z-Wave system.
Scan one of the below QR codes to get step-by-step
instructions for your hub and if it’s not listed, get in
touch:
PAGE
3
PAGE
4
You can easily check if the Remote Switch is within your Z-
Wave hub’s range:
Press and hold
the
lower paddle
for
20 seconds
until the
LED indicator starts blinking
white.
The LED indicator will
then report signal strength.
Solid green =
direct communication with the primary
controller is stable
Flashing green =
direct communication with the primary
controller is established but signal is weak
Solid orange =
stable communication with hub via
repeaters
Flashing orange =
communication with the primary
controller is established via repeaters but signal is weak
Solid red =
communication with the primary controller
has failed
Tap
the
lower paddle
to
exit
testing mode. The device will
automatically exit the range test mode a er 20 seconds.
NOTE:
This function may only be activated once the
Remote Switch has been included to a Z-Wave network.
RANGE TEST TOOL
ADVANCED SETTINGS
Parameter 1: Choose the
LED indicator mode
for your
Remote Switch.
Values: 0 - LED always off; 1 - LED on when button is
pressed to indicate scene activation or association
command (LED blinks once for single tap, twice for
double tap, etc.); 2 - LED always on in color specified
under parameter 2; 3 - LED always on in color specified
under parameter 3. Default: 1
Size: 1 byte dec
Parameter 2: Choose the
LED indicator color
for the
upper paddle
remote control triggers.
Values: 0 - white; 1 - blue (default); 2 - green; 3 - red; 4 -
magenta; 5 - yellow; 6 - cyan.
Size: 1 byte dec
Parameter 3: Choose the
LED indicator color
for the
lower paddle
remote control triggers.
Values: 0 - white (default); 1 - blue; 2 - green; 3 - red; 4 -
magenta; 5 - yellow; 6 - cyan.
Size: 1 byte dec
Accessing advanced settings looks different on every hub so if you haven’t
done this before, go to
support.getzooz.com
for step-by-step instructions.
SmartThings
Hubitat
Home Assistant
Choose your hub and scan the QR code with your phone’s
camera. Then click on the link to access the instructions.
Get more tutorials and helpful tips at www.support.getzooz.com
TAP x 1
for Scene 1, pressed (or ON basic
set for associations)
TAP x 2, 3, 4, or 5
for Scene 1 multi-tap
HOLD
for Scene 1, held (or multilevel start
level change, add brightness)
RELEASE
for Scene 1, released (or
multilevel stop level change)
TAP x 1
for Scene 2, pressed (or OFF basic
set for associations)
TAP x 2, 3, 4, or 5
for Scene 2 multi-tap
HOLD
for Scene 2, held (or multilevel start
level change, dim the light)
RELEASE
for Scene 2, released (or
multilevel stop level change)
HOW IT WORKS?
The
LED indicator
will light up anytime a paddle is pressed. It
will blink once for 1-tap, twice for 2-tap, 3 times for 3-tap, etc.
You can adjust the LED indicator color and operation mode in
the advanced settings below.
