Zoom RhythmTrak RT-323, Руководство по эксплуатации

Страница: 8 / 59

Quick
Guide
4
Creating
a
P
attern
15
Pad
Precount
Recording loops for two measures
[Pattern recording]
Pad
To Start Recording
While holding down the [ REC] key,
press the [ ] key
The [ REC] key and [ ] key light
up, a precount of four beats (one
measure) is heard, and then recording
starts. While listening to the
metronome sound,hit the pads to
record a pattern. At the end of a
pattern, recording automatically loops
to the beginning and continues,
allowing you to record over the earlier
segment.
Measure Beat
To Stop Recording
Press the [ ] key
The [ REC ] key and [ ] key light
go out and recording stops. To check
the recording, press the [ ] key.
You can also repeat these steps to
record other tracks.
Editing a recorded pattern
➝
p. 47
Changing the pattern length or beat
➝
p.51, p52
Quick
Guide
4
Creating
a
P
attern
14
Selecting the Record Pattern/Track
Press the [PATTERN] key
Use the [ ]/[ ] keys to select a user
pattern (U00 - U99)
1
2
Press any of the [DRUM A]/[DRUM B]/
[BASS] keys
3
The RT-323 switches to the pattern
mode.
When an empty user pattern is
selected, the pattern name field of the
display shows "EMPTY".
By pressing the [DRUM A] or [DRUM
B] key, you select the drum A track or
drum B track for recording.
By pressing the [BASS] key, you
select the bass track for recording.
In the factory default condition, all
user patterns of the RT-323 are
empty. If you have already created
many patterns and there is no more
empty user pattern erase a pattern
that is no longer needed.
Erasing a pattern
➝
p. 49
To change the sound (drum kit/bass
program), hold down the key you
selected above, and press one of
the [ ]/[ ] keys.
You can also use the [VALUE] dial
instead of the [ ]/[ ] keys to select
the pattern.
The user pattern feature of the RT-323 lets you create your own patterns. You can hit the pads in
time with the metronome and play an original pattern to be stored.
Quick Guide 4
Creating a Pattern