Troubleshooting
95
Troubleshooting
Check the following items first if there seems to be a problem with the RT-323.
■
Power does not come on
• Check that the correct AC adapter or batteries are used.
■
No sound or very low volume
• Is RT-323 connected correctly to playback system?
• Is volume of RT-323 set to a suitable position?
■
No sound or very low volume when hitting pad
• Press the [UTILITY] key to call up the "SENS" item and try changing the setting to an option other
than "SOFT" or "EX HARD".
■
The indication "FULL" appears and no user pattern/song can be recorded
• There is not enough free memory in the RT-323. Delete unneeded user patterns or songs.
■
Song/pattern playback does not start when [
] key is pressed
• Press the [UTILITY] key to call up the "SYNC" item, and verify that the setting is "INT".
■
JAM slider has no effect
• In song mode, operating the JAM slider has no effect. Switch to pattern mode or groove play mode.
■
No MIDI data supplied from [MIDI OUT] jack
• Press the [UTILITY] key to call up the "MIDI TR" item, and verify that the setting is "NO OUT".
• Press the [UTILITY] key to call up the items "CTRL" and "PRG", and verify that the setting is
"ON".
■
FP01/FS01 has no effect
• The FP01/FS01 function may not be correctly assigned. To assign a function, be sure to push down
the FS01 (or operate the FP01).
■
Data cannot be stored on SmartMedia card
• SmartMedia card is not formatted. Before a new card can be used, it must be formatted in the RT-
323 (
→
p. 74).
• If the indication "NOCARD" is shown, the SmartMedia card is not recognized. Verify that the card
is correctly inserted in the [DATA CARD] slot.
• If the indication "WRITE PROTECT" is shown, the SmartMedia card is write-protected. Remove
the write-protect tab or use another card.
• If the indication "CARD FULL" is shown, the SmartMedia card does not have enough free space.
Delete unneeded files (
→
p. 78) or use another card.
Application
G
uide
[Other
Functions]
94
1:
A precount of 1 measure is carried out before recording starts (default setting).
2:
A precount of 2 measures is carried out before recording starts.
PAD:
Precount is off. Recording starts immediately when a pad is hit.
To terminate the setting and return to pattern mode, press the [PATTERN] key.
You can check the remaining memory capacity of the RT-323.
Press the [UTILITY] key, and use the [
]/[
] keys to bring up the indication
"MEMORY" on the display.
The current amount of free memory in the RT-323 is shown. This display is for information
only, it cannot be changed.
To return to the pattern/song mode, press the [PATTERN]/[SONG] key.
This section shows how to initialize the RT-323. This will return all data and settings to the factory
default condition.
Hold down the [
●
REC] key while turning power to the RT-323 on.
The following indication appears on the display, and initialization is carried out automatically.
When initialization is performed, the RT-323 will restart.
Use this function with care. Initialization will clear all user pattern and song information
that you have created.
1
●
Returning the unit to the factory default settings
2
Remaining memory
1
●
Checking the memory free amount
Other Special Functions
3
Содержание RhythmTrak RT-323
Страница 1: ...OPERATION MANUAL...
