Press the [UTILITY] key, and use the [
]/[
] keys to call up "TUNING" on the
display.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to set the tuning value.
You can make the setting over the range of 435 Hz - 445 Hz, in 1-Hz steps. The factory
default setting is 440 Hz.
To terminate the setting and return to the pattern mode, press the [PATTERN] key.
This setting affects all bass programs.
The bass program output level can be set individually for the [L/MONO / R OUT] jack, [SUB OUT
1] jack, and [SUB OUT 2] jack. This is handy for separately using the bass track and drum track
output.
Press the [UTILITY] key, and use the [
]/[
] keys to call up "BASOUT" on the
display.
Use the [
]/[
] keys to set the output for the bass track to "MAIN" ([L/MONO
R/OUT] jack), "SUB1" ([SUB OUT 1] jack), or "SUB2" ([SUB OUT 2] jack).
In the default condition, "MAIN" ([OUTPUT L/R] jack) is selected.
Use the [VALUE] dial to set the bass program output level (0 - 15).
The factory default setting is MAIN = 15, SUB1 = 0, SUB2 = 0.
When the setting is completed and you want to return to the pattern mode, press
the [PATTERN] key.
This setting affects all bass programs.
4
3
2
Currently selected
output jack
Volume setting
1
●
Changing the bass program output level
4
3
Current setting
2
Application
G
uide
[Drum
K
its/Bass
Programs]
39
Application
G
uide
[Drum
K
its/Bass
Programs]
38
While holding down the [BASS] key, use the [
▲
]/[
▼
] keys.
With each push of the [
▲
]/[
▼
] keys, the bass program number is switched up or down by one
increment.
Hit the pad to check out the sound of the selected bass program.
Using the pitch assigned to pad 1 as a reference, the pitch of the entire bass program can be shifted
up or down in semitone steps·.
In pattern mode, press the [BASS] key.
Press the [UTILITY] key, and use the [
]/[
] keys to bring up the indication
"BASKEY" on the display.
The pitch of pad 1 appears on the display.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to set the transpose step width.
The available settings are F# (-6 semitones) - C (transpose off) - F# (+6 semitones). When the
pitch of pad 1 is switched, the other pads are transposed accordingly.
To return to pattern mode when the setting is complete, press the [PATTERN] key.
This setting applies to all bass programs.
The tuning of the entire bass program can be adjusted in 1-Hz steps. This makes it possible for
example to match a bass program of the RT-323 to an instrument such as an acoustic piano.
In pattern mode, press the [BASS] key.
1
●
Adjusting bass program tuning
4
3
Pitch of pad 1
2
1
●
Transposing a bass program
3
2
Bass program
name
Bass
program number
Содержание RhythmTrak RT-323
Страница 1: ...OPERATION MANUAL...
