9
<Inside View>
Item
Description
1
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes. Refer to the page 21
“
Install the Memory
Card
”
.
Note: Supports only MicroSDHC and MicroSDXC cards.
2
Audio Input /
Output
Connects to audio input and output devices, such as
microphones and speakers.
3
Digital Input /
Output
Connects to digital input or output devices, such as an alarm
trigger, panic button, etc. Digital Input (DI) / Digital Output
(DO) devices are used in applications like motion detection,
event triggering, alarm notifications, etc.
4
Reset Button
Restores the factory default settings of the camera. To reset
the camera, while the power is on, press and hold Reset
Button for at least 5 seconds.
5
DC 12V Power Input In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to
an external power adapter.
6
Ethernet Port
Connects to a network using an Ethernet cable.
7
Fall Prevention Wire Being connected to Body, this prevents Top Case from falling
when Top Case is removed.
1
3
6
5
4
2
7
