16
7. Other Connections
This section describes the procedures in preparing the external devices that you can connect to
the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO) and
Audio Input and Output devices using the bundled terminal blocks. The use of these devices,
however, is optional.
7-1. Connecting a Power Adapter (Optional)
The camera consumes 9.6W power when powered by a Power over Ethernet (PoE) switch that
is IEEE802.3af compliant. In case of using a non-PoE switch or your PoE switch has limited
power supply, you can purchase a power adapter and directly connect the camera to a power
outlet. The power adapter must be connected to the supplied terminal block before use.
To do this, follow the procedures below: (The work is done inside the camera. Work with the
Top Case opened according to Step 4 on the page 12.)
1.
Loosen the screws of the 12V and GND pins of the
power terminal block.
2.
Take note that a standard power adapter cable has
two (2) different wires:
3.
Connect the line containing the white stripe to 12 V
of the terminal block and the other to GND.
4.
Securely tighten the 12 V and GND screws loosened
in the above step 1.
White stripe: Connects to 12V Pin
Connects to GND Pin
