Zoom H4next, Руководство по эксплуатации

Страница: 19 / 156

Battery/Power outlet setting
018
To measure the lifetime of the battery
The remaining lifetime of the battery is measured more precisely,
setting the using battery type on the H4n.
Saving period for the setting <DATE/TIME>
Whenever power supply is off by dead battery, the H4n can save
the date/time setting for three minutes. When the saving time is
over, the setting will be return to the primary value.
Screen indicator for power
HINT:
• Remaining lifetime of the battery
When “Low Battery!” indication appears, immediately
switch off unit and exchange batteries, or shift power
source to AC adapter.
When remaining battery
life is getting short, “Low
Battery” indication will
be shown every two
seconds and the power
will switch off shortly after.
FULL
EMPTY
• Battery’s approximate lifetime
Usable batteries
You can use conventional alkaline and nickel metal hydride batteries.
Power supply from USB
Connect the USB cable to the H4n while it’s already connected to
the computer with the power switch off, and power is automatically
turned on via USB bus power supply. This function is only available
when the H4n is used as an SD card reader or an audio interface.
NOTE:
Alkaline battery
in general use about 6 hours
in stamina mode
use
about 11 hours
* Approximate lifetime when it is used for continuous recording on
WAV 44.1 kHz/16bit format.
Using batteries Using AC adapter
Ref.
☞
<BATTERY TYPE>
P.128
Ref.
☞
<USB BUS POWER>
P.033