Zoom GFX-4 Скачать руководство пользователя страница 29

Страница: 29 / 32

Effect programs

44 (42 e ZNR + Amp Simulator)

Effect modules

6 + ZNR + Amp Simulator

Patch memory

USER
3 patches x 5 banks x 4 groups = 60
(read/write/store)
PRESET
3 patches x 5 banks x 4 groups = 60 (read
only)
Total 120 patches

Sampling frequency

40 kHz

A/D conversion

20-bit 64-times oversampling converter

D/A conversion

20-bit 128-times oversampling converter

Input

Guitar input
Standard phone jack (mono) x 1
(nominal input level -10 dBm)

Pickup select

Normal
Input impedance 510k

Ω

(pickup type = passive)

Active

Input impedance 20 k

Ω

(pickup type =

active)

Outputs

Mono output
Standard phone jack (mono) x 1
(nominal output level -10 dBm, output
impedance 10 k

Ω

or higher)

Combined line/headphone output
Standard phone jack (stereo) x 1
(maximum output level +4 dBm, output
load impedance 10 k

Ω

or higher)

Display

Original LCD (with backlight)
2-digit, 7-segment LED

Power requirements

12 V AC, 500 mA
(from supplied AC adapter AD-0008)

Dimensions

397 mm (W) x 183 mm (D) x 60 mm (H)

Weight

1.4kg

* 0 dBm = 0.775 Vrms
* Design and specifications subject to change without

notice.

ZOOM GFX-4

Troubleshooting

Specifications

Troubleshooting

pecifications

No sound or very low
volume

• Is suitable AC adapter connected, and

power switch set to ON?

Make connections as described in "Getting
Connected" and turn power on.

• Is instrument connected correctly to INPUT

jack and playback equipment to OUTPUT jack?

Make connections as described in "Getting
Connected".

• Is shielded cable defective?

Try using another cable.

• Is amplifier turned on? Are level controls for

instrument and amplifier set to proper values?

Turn amplifier on and adjust volume to
proper level.

• Is GFX-4 set to mute condition?

Cancel the mute condition.

For some patches, the expression pedal
controls the volume. Set it to a suitable
position.

• Is MASTER LEVEL knob turned down?

• Is expression pedal raised?

Set MASTER LEVEL knob to proper position.

Bypass (mute) mode
cannot be activated

• Has unit been switched between program

mode and manual mode?

Switch function is different in program mode
and manual mode. Select correct mode.

Volume does not
change when
expression pedal is
operated in bypass
mode

• Has expression pedal been set to

function as volume pedal?

• Is mono output used (playback system

connected only to OUTPUT MONO jack)?

Assign volume control function to
expression pedal as described on page 19
and set minimum volume.

With a mono connection, the expression
pedal cannot be used to control the
volume. Connect the playback system to
OUTPUT STEREO jack.

Oscillation occurs

• Is high-gain distortion effect used

together with compressor/booster
effect or EQUALIZER?

Reduce parameter values of high-gain
module (gain, tone, level).

Expression pedal on/off
switching is not
performed properly

• Readjusting the pedal may correct the

problem.

Readjust pedal, as described on page 28.

Symptom

Check

Remedy

Содержание GFX-4

































Результаты поиска

Содержание GFX-4

Отзывы:

Бренды по названию

Популярные бренды

Zoom GFX-4, Руководство по эксплуатации

Результаты поиска

Содержание GFX-4

Отзывы:

Бренды по названию

Популярные бренды