1.
Turn power to the GFX-4 on while keeping the
STORE key depressed.
The display shows "INIT".
2.
Press the STORE key once more.
All Initialize is carried out. If All Initialize was carried
out, the unit automatically returns to the program mode.
Note that when All Initialize is executed, the contents of
all patches stored by the user will be overwritten (erased).
When wishing to cancel All Initialize, press the
MANUAL/CANCEL key before step 2.
Other Functions
All Initialize
Adjusting the Expression Pedal
28
ZOOM GFX-4
This section contains information about special functions such as how to return the GFX-4 to the factory default condition
and how to readjust the expression pedal.
Other
Functions
1.
Hold down the PEDAL module key while turning
on power to the unit.
The indication "MIN" appears on the display.
2.
With the expression pedal fully raised, press the
STORE key.
The display indication changes to "MAX".
3.
Push the expression pedal fully down and then
lift your foot off the pedal (the pedal goes back a
little). Press the STORE key at this point.
The adjustment is completed, and the unit returns to the
program mode.
Push strongly,
so that pedal
touches here
When foot is lifted,
pedal returns slightly
Press STORE key
The All Initialize function is a special function that lets you reset the GFX-4 to the condition in which it was originally
shipped. When All Initialize is performed, all settings of the unit including all user group patches are returned to the
default condition.
The expression pedal of the GFX-4 uses a highly reliable optical sensor mechanism. The pedal is adjusted for optimum
operation at the factory, but it can be readjusted as follows if required.
