Zoom GFX-4, Руководство по эксплуатации

Страница: 27 / 32

TYPE 7
PP DLY
(Pingpong Delay)
(Echo)
This is a pingpong delay effect with a long delay time (maximum 2 seconds).
TYPE 8
ECHO
DLYTIM
FB/HLD
DLYMIX 1– 99,1.0 – 2.0 0 - 50, Hd, HS 0 – 50
This is a warm sounding delay effect with a long delay time (maximum 2 seconds).
Adjusts the delay time in 10-ms steps
up to 1 second. Above that, adjustment
is in 100-ms steps.
0 - 50: Adjusts the delay feedback
amount.
Hd: Causes the effect to operate as hold
delay.
HS: Causes the effect to operate as hold
delay with seamless function.
Adjusts the delay sound mixing ratio.
TYPE 9 REVERS
DLYTIM
FB
DLYBAL 50 – 99, 1.0 – 2.0 0 – 50 0 – 50
This is a special delay effect where the effect sound seems to be rotating in reverse.
Adjusts the delay time in 10-ms steps
up to 1 second. Above that, adjustment
is in 100-ms steps.
Adjusts the delay feedback amount. Adjusts the delay sound mixing ratio.
TYPE 10
ST CHO
DEPTH RATE CHOMIX
(Stereo Chorus)
(Reverse)
0 – 50 1 - 50 0 – 50
This is a stereo chorus effect with clear sound and a wide spread.
Adjusts the effect depth. Adjusts the modulation rate. Adjusts the chorus sound mixing ratio.
Original sound
Delay sound
Patch A Patch B
Patch change
TIME
LEVEL
[Seamless Delay]
Foot switch 3
Press
Effect sound
Original sound
[Hold Delay]
Release Press
Record
Foot switch 3
Press
Effect sound
Original sound
Press
Record
Delay time
Repeat playback
Repeat playback
By selecting PP-DLY or ECHO as the effect type in
the DELAY/REVERB module and setting parameter 2
to "Hd" or "Hs", a patch can use the hold delay
function where the foot switches serve to control
recording and playback of a phrase.
• Select the above type of patch in manual mode and
press foot switch 3 to start recording.
• When foot switch 3 is released or the delay time set
as parameter 1 has elapsed, recording terminates, and
repeat playback of the recorded phrase starts
automatically.
• Pressing foot switch 3 during repeat playback stops
playback.
Hold Delay
Using the seamless delay function causes the delay sound from the
immediately preceding patch to be heard still after switching patches.
The seamless delay function of the GFX-4 can be used when both the patches
(before and after switching) fulfill all of the following conditions:
(1) REV/DLY module = ON
(2) REV/DLY module effect type = PP-DLY or ECHO
(3) Delay time = Max. 1 second
When both the patches (before and after switching) have the REV/DLY
module ON and the FB/HLD parameter set to "HS", the hold delay function
can be used as seamless delay. In this case, the recorded phrase continues to
be repeated also after the GFX-4 is returned to program mode and the patch is
switched during repeat playback. To force an end to the hold delay function
after a patch change, set the unit to the bypass condition.
Seamless Delay (Patch delay)
27
ZOOM GFX-4
Effect
Types
a
nd
Parameters