Zoom F8n Скачать руководство пользователя страница 9

Страница: 9 / 198

Connecting mics/other devices to Inputs 1–8

F8n

Multi Track Field Recorder

Connecting mic capsules

A ZOOM mic capsule can be connected to the MIC IN connec-
tor on the back of the

NOTE

•

The mic capsule input is assigned to tracks 1/2.

•

When a mic capsule is connected, Inputs 1/2 cannot be used.

Connecting and disconnecting mic capsules

Remove the protective caps from the

and the mic

capsule or extension cable.

While pressing the side buttons on the mic capsule or

extension cable, connect it to the main unit, inserting

it completely.

To disconnect the mic capsule or extension cable, pull

it away from the main unit while simultaneously

pressing the buttons on its sides.

NOTE

•

Do not use too much force when disconnecting. Doing so could
damage the mic capsule, extension cable or main unit.

•

Reattach the protective cap when a mic capsule is not connected.

Stereo input

By enabling the stereo link for tracks 1/2, 3/4, 5/6 or 7/8, the
corresponding Inputs (1/2, 3/4, 5/6 or 7/8) can be handled as a
stereo pair. (

→

P.27)

When linked, Input 1, 3, 5 or 7 becomes the left channel and
Input 2, 4, 6 or 8 becomes the right channel.

Содержание F8n







































































































































































































Результаты поиска

Содержание F8n

Отзывы:

Похожие инструкции для F8n

Бренды по названию

Популярные бренды

Zoom F8n, Руководство по эксплуатации

Результаты поиска

Содержание F8n

Отзывы:

Похожие инструкции для F8n

Бренды по названию

Популярные бренды