ZOOM B2.1u
14
Editing a Patch
The patches of the B2.1u can be freely edited by changing the effect parameter settings. Try editing the
currently selected patch to create your own sound.
A G
O F
Select the effect module
Turn the Module selector to select the
effect module to edit. The following
settings are available.
Dot shows that unit
is in edit mode
Effect type
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
To switch an effect
module on and off
To switch the selected module
between ON and OFF, press one
of the [
W
]/[
Q
] foot switches.
(1) COMP/LIMIT
module
(2) WAH/EFX
module
(3) DRIVE/SYNTH
module
(4) ZNR/MIX
module
(5) LO EQ module
(6) HI EQ module
(7) MOD/SFX
module
(8) DELAY
module
(9) REVERB
module
(10) Pedal/foot switch related parameters
When you switch to a different module, the effect
type currently selected for that module is shown on
the display. While the B2.1u is in edit mode, a dot
appears in the bottom right of the display.
The indication "oF" appears on the
display. When you press one of the
foot switches again, the indication
returns to the previous condition.
HINT
The ZNR/MIX module cannot be
turned off in this way. To disable ZNR,
set the effect parameter value to "oF".
