5
To have the AP+4’s clock automatically updated by an NTP
server, on the
Selecting a Time Zone
page, select a
Time
Zone
and an
NTP Server
, and click
Next
.
6
In the unlikely event that you need to set up or modify your
wired local network, use the
LAN Interface Setup
page.
Please see the instructions in the User Guide on the AP+4
CD.
7
To connect to the Internet, select the method on the
Setting
Up Internet Access
page.
•
The vast majority of users should select
DHCP Client
as
the
WAN Access Type
.
•
If you select DHCP Client and at the end of the
installation process you have not connected successfully
to the Internet, it is possible that you are running PPPoE
software. In that case, at
WAN Access Type
select
PPPoE
(
P
oint-to-
P
oint
P
rotocol
o
ver
E
thernet). Then
enter the
User Name
and
Password
given to you by
your service provider.
•
If you are using the AP+4 as an Ethernet Client or a
Repeater, at
WAN Access Type
you should also select
DHCP
Client
unless
you have requested a Static IP
from your Internet Service Provider.
3
