11
strength is adequate. Refer to the documentation that came
with the network card if you need help doing this.
If You Need Help
If you need assistance, you should consider contacting your service
provider. We encourage you to register your product and to notice the
many support options available from Zoom. Please go to
www.zoom.com
and select
Technical Support
. From here you can
register your modem
and/or
contact our technical support experts
and/or use our intelligent database
SmartFacts
tm
and/or get
warranty
information.
Regulatory Information
U.S. FCC Part 68 Statement
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. The unit bears a label on the back which contains among
other information a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company. This
equipment uses the following standard jack types for network connection:
RJ11C. This equipment contains an FCC compliant modular jack. It is designed
to be connected to the telephone network or premises wiring using compatible
modular plugs and cabling which comply with the requirements of FCC Part 68
rules.
The Ringer Equivalence Number, or REN, is used to determine the number of
devices which may be connected to the telephone line. An excessive REN may
cause the equipment to not ring in response to an incoming call. In most areas,
the sum of the RENs of all equipment on a line should not exceed five (5.0). In
the unlikely event that this equipment causes harm to the telephone network, the
telephone company can temporarily disconnect your service. The telephone
company will try to warn you in advance of any such disconnection, but if
advance notice isn't practical, it may disconnect the service first and notify you as
soon as possible afterwards. In the event such a disconnection is deemed
necessary, you will be advised of your right to file a complaint with the FCC.
From time to time, the telephone company may make changes in its facilities,
equipment, or operations which could affect the operation of this equipment. If
this occurs, the telephone company is required to provide you with advance
notice so you can make the modifications necessary to obtain uninterrupted
service.
There are no user serviceable components within this equipment. See warranty
information on the CD.
It shall be unlawful for any person within the United States to use a computer or
other electronic device to send any message via a telephone facsimile unless
such message clearly contains, in a margin at the top or bottom of each
transmitted page or on the first page of the transmission, the date and time it is
sent and an identification of the business, other entity, or individual sending the
message and the telephone number of the sending machine or of such business,
other entity, or individual. The telephone number provided may not be a 900
number or any other number for which charges exceed local or long distance
transmission charges. Telephone facsimile machines manufactured on and after
December 20, 1992, must clearly mark such identifying information on each
transmitted message. Facsimile modem boards manufactured on and after
December 13, 1995, must comply with the requirements of this section.
