ZOODOS 48465, Инструкция по эксплуатации

Страница: 37 / 65

37
NO
SE
FI
GB
DE
DK
PL
ET
Do not saw items that are so small they
cannot be securely clamped.
Never adjust the mitre angle or bevel angle
while the saw is running.
Always keep the spindle and flanges used
for mounting the saw blades clean.
Never use the mitre saw if the blade guard
is not working correctly. The blade guard
should close automatically when the mitre
saw is not in use, and must NEVER be
secured in an open position.
Never allow the blade to be in contact with
the item to be cut, or other objects, when
starting the saw.
Check that the item does not contain nails,
screws or other objects that may damage
the saw blade.
The saw blade will not stop immediately
when you release the on/off button.
Tighten all lock screws and secure the
saw arm in the lowest position if you are
transporting the saw.
Be very careful when using the built-in laser.
Do not look directly into the laser beam. The
laser beam can damage your eyesight.
The laser beam must not be directed at
people or animals, and it must not be
directed at any reflective material, such as
glass or foil.
Preparation
Fitting the dust bag
Fit the dust bag (15) to the extractor nozzle
(26).
Mounting support bars
Insert the support bars (19) into the holes
(35) on the sides of the saw.