Page 3
©2017 ZOO FANS INC. ALL RIGHTS RESERVED
1650 38
th
St, Suite 201W Boulder, CO 80301 PHONE: 303-557-1852
zoofans.com
REV 10042017
INSTALLATION
BEFORE INSTALLING THE FAN IN THE CEILING,
FOLLOW THESE ASSEMBLY INSTRUCTIONS
ASSEMBLY
STEP 1: Attach Motor to Diffuser
1.
Place the diffuser on a soft surface or support it by the outer edges all the way around (such as placing it over the
opening of a box) so the jet ball is not damaged during this operation
2.
The motor will come pre-assembled with the adapter ring attached. Place the motor down over the diffuser as
shown below, and install the adapter ring onto the intake side of the jet ball diffuser.
3.
Align the motor so the pre-installed wire comes straight out, toward the side where the power supply wire from
the circuit will be supplied
Combination Diffuser
Motor
Plenum
Place the motor over the back of the diffuser so the adapter
ring attaches to the intake side of the jet ball diffuser
Adapter ring
