ZSI-320 User Manual
Issue 03
Page 3 of 20
Introduction
ISDN
connection
Intersite
communications
Video
transmission
System
backup
64K or 128K ISDN operation
.
KEY FEATURES
Thank you for purchasing Meyertech’s ZSI-320.
Please read this user guide prior to using
This product. It will help you to achieve the maximum
benefit from the product. The manual covers
installation, operation and maintenance of a ZSI-320.
What is a ZSI-320?
A ZSI-320 is part of the Zonevu Site Controller family. It
allows the interconnection of remote sites via an ISDN line.
The unit can operate as either a transmitter or a receiver.
Combined with other members of the Meyertech site controller
family, an operator can seamlessly control cameras
located throughout the country.
When combined with other elements of Meyertech’s Site
Controller family, a unit can, under alarm conditions,
automatically contact a remote control room or can be part
of a seamless dial on demand service.
The features described in this manual refer to :
Version 1.5.2.0 of the ZSI-320 firmware
Z
S
I
-
3
2
0
This equipment is designed to make automated connections over an ISDN
network. Meyertech can accept no responsibility for any call charges incurred.
The information in this manual is believed to be accurate and reliable. However,
Meyertech Limited assumes no responsibility or liability for its use, or for any
infringement of patents or other rights of third parties, which may result from its
use. No license is granted by implication or otherwise under any patent or other
rights of Meyertech. All specifications are subject to change without prior notice.
MEYERTECH LIMITED
are committed to continuous product development and
therefore reserve the right to change specifications without notice.
©
2003-5 ALL RIGHTS RESERVED.
MEYERTECH LIMITED
