ZVR-130 User Manual
Issue 06
Page 11 of 33
11
ZV
R-1
30
Configuring the ZVR-130
The advanced features of ZVR-130 configuration are achieved when connected to a ZoneVu controller. This maybe in a
ZoneVu system on-site or when connected directly to a keyboard.
To configure the advanced features of the ZVR-130 you will require access to a System keyboard such as the ZVK-007 or
ZVK-77 connected either directly to the receiver or via a ZoneVu controller such as the ZSC-1000 or ZVM-328. When
connected via a video matrix be sure to first select the receiver to a monitor within your view as configuration is via on screen
menus.
Configuration using a ZVK-77
To configure the ZVR-130 using a ZVK-77 system keyboard you will first need to access the two ZVR Config. Menus shown
below. To do this you will need to log onto the keyboard at the relevant level which permits access to the Program / Setup
option. For further details please refer to the relevant section in the ZVK-77 User and configuration manual for how to access
the ZVR Config. Menus.
ZVK-77 LCD SCREEN (Menu A)
Menu Option
Description
Engineer
The name of the current user logged onto the ZVK-77
ZVR Config.
The current menu
Type ZVR-x30
Press this to cycle through the receiver types
Start config
Select to start configuration
Select Camera
Select this option if you wish to configure a different ZVR-130
Change Monitor
Select this option if you want to change to display the ZVR-130 menus on a different
monitor
Select Site
Select this option if you want to configure a ZVR-130 on a different site
Toggle Pot Display
Turn on the displaying of the feedback potentiometer values
Engineer ZVR Config
Type Site (local)
ZVR-x30 Monitor 1
Camera 1
Start
Config
Change Select Select Toggle pot
Monitor Camera Site display
