ZVK-66 User Manual
Issue 03
Page 12 of 17
Z
V
K
-
6
6
Safety Precautions
1. Carefully read this Product Manual prior to commencing installation and configuration.
2. Before working on this product power it down and remove the power leads. Removing panel’s modules or PCB’s
may cause damage to the product and present an electric shock and fire hazard.
3. To reduce the risk of electric shock and fire hazard do not operate this product with panels or covers removed.
4. Do not install or operate the product near water.
5. Do not install or operate this equipment outdoors.
6. If work is carried out on the product with panels and covers removed ensure full electrostatic handling procedures
are adhered to.
7. Louvers and openings are provided in the product enclosures for ventilation purposes to protect it from
overheating. Under no circumstances block or cover these openings.
8. Ensure the product is operated in a suitably temperature controlled environment within the specification limits.
9. Do not operate the product in humidity greater then 90%.
10. Do not drop objects of any kind through the product louvers and openings. This may cause electric shock and fire
hazard and product malfunction.
11. Avoid liquid spillages on the product. This may cause electric shock and fire hazard as well as product
malfunction.
12. Never attempt to service this product yourself. This product contains no serviceable parts Refer all servicing
requirements to the Meyertech Service Centre or appointed Meyertech Service Agent
13. Do not operate this product if
13.1. Any product power leads are damaged.
13.2. If the product has been exposed to rain.
13.3. If the product has been dropped or the enclosure has been damaged.
13.4. If liquid has been spilt on the product.
13.5. If the appliance has malfunctioned or is not operating to its functional specification.
13.6. If the products cooling fans fail to operate.
14. This product must only be operated with the power supply provided or if supplied without a power supply, by the
type of power source indicated in the specification.
15. Follow all warnings and instructions marked on the product and in this manual.
16. To clean the enclosure of the product use a cloth. Do not use liquid solvent-based cleaners.
.
