Zonet ZSR0104CP, Руководство пользователя

Страница: 27 / 46

Cable/DSL Broadband Router w/4-Port Switch
26
System IP address. This is the router’s LAN port IP address (Your LAN
clients default gateway IP address).
IP Subnet Mask Specify a Subnet Mask for your LAN segment.
DHCP Server on You can enable or disable the DHCP server. By
enabling the DHCP server the router will automatically give your LAN
clients an IP address. If the DHCP is not enabled then you’ll have to
manually set your LAN client’s IP addresses; make sure the LAN Client
is in the same subnet as this broadband router if you want the router to
be your LAN client’s default gateway .
DHCP IP Pool You can select a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients.
NOTE:
By default the IP range is from: Start IP 192.168.10.2 to End IP
192.168.10.101. If you want your PC to have a static/fixed IP address
then you’ll have to choose an IP address outside this IP address Pool.
DHCP IP Address Reserving Reserve some IPs to specific computer.
You need to enter the MAC address of the network card installed in
computer to assign a particular IP to it. Enter the relative values and
then click ADD. Also you can check the “Auto Setup” checkbox button to
assign a particular IP to your computer.
Current Address Reserving Table: This display shows the valid
reserving IPs in Broadband Router. User can view the information about
current address reserving.
Fill in the all of the setting to be added and then click "Add". Then this
Special Application setting will be added into the "Current Address
Reserving Table" below.
If you want to remove some Special Application settings from the "Current
Address Reserving Table", select the Special Application settings you want
to remove in the table and then click "Delete ".
When finished making your changes on this screen, click the Save button
to save these changes.