16
How to operate the software
If you want to verify whether the backup file is valid, you can select the box
Check the
data integrity of the image file when backup is complete.
6.
Add description of the backup file in the Image File Description box.
7.
Review the information and settings that have been specified. Click
Start Backup
to begin
copying data into an image or click
Previous
to modify your selections. You can complete
the backup by clicking
Start Backup
. If the system is busy, ZNS8022 will try to back up
again automatically.
NOTE:
If the size of the backup data exceeds the writable disc capacity, ZNS8022 will automatically
split the image into several volumes and burn onto different discs. It will prompt you to
insert another disc when needed.
If there are some data on the disc, you will be asked whether you wish to erase the disc. If
you want to continue, click
Erase
. Click
Change
to insert another blank CD/DVD, or click
Cancel
to stop burning.
b-2. Restoring from a Recovery CD/DVD
1.
Insert the Recovery CD/DVD and select
Restore
and then click
Restore My Computer.
2.
Click
Browse
to select the restore point from the CD/DVD.
3.
Select a partition or an entire hard drive to restore.
4.
Select a destination partition or unallocated space to restore the image file. Click
Next
to
begin the process.
Note: An image file may contain backup data of more than one partition. You can select and
restore one or more partitions at a time.
If you want to restore the entire hard drive, click the drive entry only.
5.
Click
OK
to begin restoration process. Or click
Cancel
to return to Main Console.
Содержание ZNS8022 - SOFTARE
Страница 1: ......
