Features
‧
Plug & Play
‧
Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards
‧
NWAY Auto-negotiation support, Auto-Sense the transmission speed, half/full duplex
‧
16/24 ports 10/100/1000M Auto-Sense, Auto-MDI/MDIX
‧
Adopt IEEE802.3x flow control for full-duplex and backpressure for half-duplex
‧
Store and forward structure
‧
MAC address auto learning
‧
Support IEEE802.3x for broadcasting storm control
Package Contents
‧
One 16/24 Ports Gigabit Switch
‧
One Quick Installation Guide
‧
One Power Adapter
‧
Four rubber pads
‧
Two L-shape rackmount brackets and screws
Front Panel
‧
LED lights panel
LED
Status Operation
Power
Green Steady: Power is ON
10/100M Link
Green
Steady: Indicates a 10/100M device is connected
Flash: the port is transmitting/receiving data
Off: Indicates either a 10M device or no device connected
Full Duplex
(FDX/COL)
Green
Steady: Indicates this port is working under full duplex mode
Flash: Indicates there is data collision at this port
Off: Indicates this port is working under half duplex mode
1000M Link/Act Green
Steady: Indicates a Gigabit device is connected
Flash: the port is transmitting/receiving data
Off: Indicates either a 10/100M device or no device connected
‧
Front Panel Diagrams
ZFS3216E(top) / ZFS3224E(bottom)
Rear Panel
‧
AC power line socket and power switch
Side Panel
‧
Ventilation and cooling holes
Please make sure there are no substances blocking up these holes, and leave enough space on both sides of
the switch, so the switch can have proper ventilation and cooling to avoid over heat inside the unit, which
may cause damages and/or system malfunctions.
