Zonestar Z9 Series, Руководство пользователя

Страница: 41 / 57

41
Level the Z aixs - step 2
Step 2 : adjust the position of Z ENDSTOP, steps as following:
1. Adjust four hand nuts under the hot bed ( fig 1 ), so that the distance is almost the same
between the hot bed and the hot bed bracket (The end of the screws are flush with the
hand nuts).
2. Rotate the coupling (
fig 4 ) to move up the hot bed and stops when the nozzle ( fig 2 ) is
almost touched the hot bed.
3. Adjust the height of
Z offset adjusting screw ( fig 4 ) and stops when the Z- ENDSTOP
has been triggered, lock the screw by nylon pole after finish.
4