Zonestar Z9 Series, Руководство пользователя

Страница: 40 / 57

40
Level the Z aixs - step 1
Step 1: adjust the Z axis left and right slider components to the same height,
steps as following:
1. loosen the set screws of the Z-axis timing pulley (fig 1) .
2. Manully Rotate the lead screws ( fig 5 and 6 ) to move down the hotbed to the bottom,
until both of the right and left copper nut touched the timing pulleys.
3. Tighten the set screws lock the timing pulleys to the lead screw again.
1