C9154 Installation - pg. 17
53.
Check tow hook clearance to the front bumper valance. They should rest just
above the bottom of the factory cut-out in the valance. Clearance varies between
mount years. Additional valance trimming may be needed.
54.
If equipped, reconnect the fog lights in the front bumper.
55.
Install the grill on the vehicle in the reverse of how it was removed.
56.
Install the plastic core support cover on the top of the core support and fasten
with the original plastic retaining clips.
»
p
arking
B
rake
c
aBle
57.
Locate the tab on the driver's side body mount where the parking brake cable
runs through it.
Figure 26A
Bend the tab up flat against the mount to gain slack
for the cable.
Figure 26B
Run the cable back through the mount into its original
location.
Figure 26C
Figure 26A
Figure 26B
