Zonar V4, Инструкция по установке и эксплуатации

Страница: 34 / 35

V4™
Installation/User Guide 34
Notices
It is the Owner's sole responsibility to install and use the Zonar products in a manner that will
not cause accidents, personal injury or property damage. For the purposes of this notice,
"Owner", "you" and "your" means the party (including any person authorized by that party to
use and/or install the Product) that has either: (a) purchased the Product; or (b) leased the
Product from Zonar Systems, Inc or its related companies. The Owner of this product is solely
responsible for observing safe driving practices. The choice, location, and installation of all
components of the Product is critical. If installation is not correct, the Product may not
perform at its designed potential or specifications. If in doubt, consult your vehicle's
manufacturer.
Warning: (Part 15.21)
Changes or modifications not expressly approved by Zonar Systems could void the user's
authority to operate the equipment.
Caution: RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile transmitting devices, the
antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 25 cm (10 inches) from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. Users and installers must be provided
with antenna installation instructions and transmitter operating conditions for satisfying RF
exposure compliance.
Use only supplied and approved antennas. Use of unauthorized antennas or modifications
could impair signal quality, void your warranty and/or result in violation of FCC regulations.
FCC Compliance Statement (Part 15.19), IC Compliance Statement (RSS-210)
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada (IC).
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and