Zoltrix Audio Plus 3200 V.2, Руководство пользователя

Страница: 20 / 40

1 - 15
Hardware/Software Section 4- Utilities Software
After I/O settings are tested, you may proceed to choose to test synthesized
music, output voice and test recording functions. Speakers connected to the
Audio Plus 3200 are necessary for all the tests. Microphone is necessary for test
recording.
Synthesized music test generates music output with the Audio Plus 3200 on
board synthesizer. Output voice test generates voice with the Audio Plus 3200
digitized output channel. For test recording, you need to speak to the
microphone. Your speech will be reproduced on the digitized output channel.
Fig 3. APTEST environment.
If you can't hear sound during any of the above tests, check connections between
the Audio Plus 3200 and speakers, microphone then run the test again.
If your the Audio Plus 3200 passes these tests, it is OK for your applications.
According the APTEST shows the I/O address, IRQ and DMA information’s,
please add the follow setting to your AUTOEXEC.BAT file.
SET BLASTER=A220 I7 D1
Note: A#.......# is the I/O address
I# ........# is the IRQ number
D#.......# is the DAM channel
This setting in AUTOEXEC.BAT will be helpful to some softwares to recognize the
Audio Plus 3200.