Zoltrix Audio Plus 3200 V.2, Руководство пользователя

Страница: 9 / 40

1 - 4
Audio Plus 3200
2
Installation the Audio Plus 3200
WARNING: Before installing the Audio Plus 3200, you should familiarize
yourself with major parts of it. Improper use of it may cause permanent damage
to itself and/or your PC and/or external equipment's.
2.1 Installing the Audio Plus 3200 into your Computer
After you adjust hardware jumper settings, you can install the Audio Plus 3200
into your system, please follow the steps carefully for a typical system.
1. Turn off your computer and disconnect all power cords.
2. Remove the cover from your computer. Refer to your computer system user's
guide for more details.
3. Choose and empty 16 bit expansion slot. (Preferably away from other cards to
cut down on noise and interference).
4. Remove the expansion slot cover by unscrewing slot cover screw. Keep the
screw for later use.
5. Pick up your Audio Plus 3200 by its top edge. Line up the Audio Plus 3200
with guide and expansion slot connector. Firmly slide the Audio Plus 3200
into the slot. Anchor the Audio Plus 3200's mounting bracket with the screw
you kept from step 4.
6. Put the computer cover back on and reconnect the power cords.
Note: At step 5, If the Audio Plus 3200 will not slide in smoothly, do not
force it. Make sure the Audio Plus 3200 is lined up properly, and try again.
You may need to loosen the adjacent slot's rear cover to make the Audio Plus
3200 fit properly.