CMCT Monitoring System
Instructions for Use
Page 15 of 31
5.3
CONNECTING THE SENSOR TO THE PATCH
1.
Remove the Sensor from the Charger.
2.
Hold the Patch so that the word “ZOLL” on the Patch
is right-side up.
3.
Place the lower tabs of the Sensor on the lower part
of the Patch frame.
4.
Press the rest of the Sensor onto the Patch until you
hear a snap. The Sensor should be firmly attached to
the Patch.
See
Figure 11
.
5.4
APPLYING THE DEVICE
The device can be applied to either of the two locations detailed below. Once you wear the
device in one location, you will continue to wear the device at the same location for the entire
duration of your prescription.
5.4.1
LEFT-SIDE LOCATION
1.
Stand in front of a mirror.
2.
Remove both parts of the Patch liner.
3.
Turn the Patch so that the word “ZOLL” on the Patch is at the top.
4.
Raise the left arm to shoulder height.
5.
If needed, slightly move the breast aside when applying the Patch.
6.
Place the Patch below the left arm pit with the nipple aligned anywhere between the
top and middle of the Sensor. See
Figure 12
.
7.
Ensure the Patch is completely adhered to the skin.
Figure 11: Sensor Patch
attachment
