CMCT Monitoring System
Instructions for Use
Page 14 of 31
5.1.3
CHARGING THE GATEWAY – FIRST USE AND EVERY DAY
1.
Place the Gateway on the Charger in its designated area.
2.
The Gateway screen should light up and display it is being
charged. Once removed from the Charger, the Gateway
screen will display battery status in percent.
3.
The Gateway, typically, takes about three hours to charge.
See Figure
9
.
5.2
PREPARING THE SKIN
IMPORTANT
: This step ensures good adhesion to skin.
1.
Remove your bra/ undershirt.
2.
If hair is present, trim hair at the Patch location indicated by your physician. See images
below.
3.
Use provided Prep Wipes to clean area where Patch will be applied and allow skin to
dry.
Figure 9: Charging the
Gateway
Figure 10: Trimming area
