ZOLL AutoPulse NXT, Руководство пользователя

Страница: 17 / 85

Chapter 3. Platform
12 www.zoll.com
Compression mode
The system has two compression modes: 30:2 and Continuous. See Table 3.1.
The 30:2 mode compresses the patient 30 times and then pauses for three seconds to allow you to administer
ventilation. The platform beeps at the 28
th
, 29
th
, and 30
th
compression to signal that the ventilation pause is
coming up.
During Continuous mode, the platform does not pause. The platform beeps at the start of every eighth
compression, guiding ventilations at a rate of 10 breaths per minute.
Changing the compression mode
The factory default compression mode is 30:2.
Figure 3.3. Compression Mode button
To change the compression mode for the current session
1. Ensure the platform is on.
2. Check the default compression mode:
•
When the default compression mode is 30:2, Compression Mode is not illuminated.
• When the default compression mode is Continuous, Compression Mode is illuminated.
3. Press and release the Compression Mode button . The platform beeps once.
4. To change the compression mode back, press and release Compression Mode again.
Note. When the platform turns off, the compression mode reverts to the default compression mode.
9
Band guard
lock indicator
Red
• Flashing on one user control
panel if the band guard on
that side is not correctly
installed on the platform. The
light is solid on the other user
control panel.
• Flashing on both user control
panels if the band guards on
both sides are not correctly
installed on the platform.
Note. If either indicator is flashing,
the Start button is disabled.
Note. Compressions stop if a band
guard detaches from the platform.
Indicator only
Number Name Color Indicator Action
Table 3.1: User control panel (Continued)
’