ZOJE ZJ9700, Руководство по эксплуатации

Страница: 33 / 86

- 28 -
1.The pedal is operated in the following
four steps:
1)The machine runs at low sewing speed
when you lightly depress the front part of
the pedal B.
2)The machine runs at high sewing speed
when you further depress the front part of
the pepal A.
3)The machine stops(with its needle up or
down) when you reset the pepal to its
original position C.
4)The machine trims threads when you
fully depress the back part of the pedal D.
*The machine will perform normal thread trimming even if you depress the back part of the pedal
immediately following high or low speed sewing.
*The machine will completely perform thread trimming even if you reset the pedal to its neutral
position immediately after the machine started thread trimming action.
*When the machine stops with its needle down ,and if you want to bring the needle up ,depress the
back part of the pedal once.
*If the machine is fixed with the automatic liftting pressure food stucture,after stopped the machine
and delayed two or three seconds,then thrample the threadle backward once,so the pressure foot will
lift automatically when the threadle reback,the pressure foot will be down automaticaly .
15.Pedal operation (Fig.21)