Template machine - Touch screen E2
Pattern selection interface
22
Under the interface of "detection of wire cutting motor", click
"position" to enter the interface of "position". At this time, the
icon of "position" is displayed in blue
, and the display
content is as follows:
①
Origin status of shear line: display the current ON/OFF status
of the origin sensor of shear line according to the origin status of
shear line
②
Click "test trim thread", the motor performs a trim
thread action
③
Click "trim thread position", and the trim thread
motor will rotate to the trim thread position (return knife
position).
④
After clicking "parting position", the cutting motor
will rotate to the parting position (cutter out position).
⑤
After clicking "origin", the wire cutting motor will
return to the initial position (after the above operation of wire
cutting position dividing position, press the function key to return
to the initial position).
