background image

17

WARRANTY

This product is warranted for one (1) year from the date of purchase or two (2) years from the date of 

manufacture, whichever occurs first.  Subject to the conditions hereinafter set forth, the manufacturer 

will repair or replace to the original consumer, any portion of the product which proves defective due 

to defective materials or workmanship. To obtain warranty service, contact the dealer from whom the 

product was purchased. The manufacturer retains the sole right and option to determine whether to 

repair or replace defective equipment, parts or components. Damage due to conditions beyond the 

control of the manufacturer is not covered by this warranty. For warranty questions or service, call 

1-866-994-4148.

THIS WARRANTY WILL NOT APPLY: (a) To defects or malfunctions resulting from failure to properly 

install, operate or maintain the unit in accordance with printed instructions provided; (b) to failures 

resulting from abuse, accident or negligence; (c) to normal maintenance services and the parts used in 

connection with such service; (d) to units which are not installed in accordance with normal applicable 

local codes, ordinances and good trade practices; and (e) if the unit is used for purposes other than for 

what it was designed and manufactured.
RETURN OF WARRANTED COMPONENTS: Any item to be repaired or replaced under this warranty 

must be returned to the manufacturer at such place as the manufacturer may designate, freight prepaid.
THE WARRANTY PROVIDED HEREIN IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, 

AND MAY NOT BE EXTENDED OR MODIFIED BY ANYONE. ANY IMPLIED WARRANTIES SHALL 

BE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY AND THEREAFTER ALL SUCH 

IMPLIED WARRANTIES ARE DISCLAIMED AND EXCLUDED. THE MANUFACTURER SHALL 

NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR 

SPECIAL DAMAGES, SUCH AS, BUT NOT LIMITED TO, DAMAGE TO, OR LOSS OF, OTHER 

PROPERTY OR EQUIPMENT, LOSS OF PROFITS, INCONVENIENCE , OR OTHER INCIDENTAL 

OR CONSEQUENTIAL DAMAGES OF ANY TYPE OR NATURE. THE LIABILITY OF THE 

MANUFACTURER SHALL NOT EXCEED THE PRICE OF THE PRODUCT UPON WHICH SUCH 

LIABILITY  IS BASED.
This warranty gives you specific legal rights, and you may have other rights which vary from state to 

state. Some states do not allow limitations on duration of implied warranties or exclusion of incidental or 

consequential damages, so the above limitations may not apply to you.

In those instances where damages are incurred as a result of an alleged pump failure, the 

Homeowner must retain possession of the pump for investigation purposes.

Содержание 1104-0082



















Отзывы: