Zodiac WD002088, Инструкция по установке

Страница: 29 / 36

27
5.2.2 Alarm code meaning
Code Description Possible cause Resetting
A01
Faulty
Humidity sensor
• Sensor has short circuited.
• Sensor disconnected.
• Faulty sensor (replace sensor).
Automatic
A02
Faulty
Ambient temperature sensor
• Sensor has short circuited.
• Sensor disconnected.
• Faulty sensor (replace sensor).
Automatic
A03
Faulty
Temperature sensor - evaporator
• Sensor has short circuited.
• Sensor disconnected.
• Faulty sensor (replace sensor).
Automatic
A04
Faulty
Temperature sensor - blower
• Sensor has short circuited.
• Sensor disconnected.
• Faulty sensor (replace sensor).
Automatic
A05 Ambient temperature too high
• Temperature outside range of
operation.
• Faulty sensor.
Automatic
A06 Ambient temperature too low Automatic
A07 Maintenance alarm • Reminder for global maintenance.
Manual
A13 Blowing temperature too high
• Clogged filter.
• Faulty sensor.
• Faulty fan.
Automatic
A14 High pressure
• Clogged filter.
• Obstructed air inlet.
• Cooling circuit problem.
Automatic*
A15 Low pressure • Cooling circuit problem. Automatic*
A16 Fan speed
• Faulty fan.
• Electric power unstable.
Automatic*
*Automatic reactivation except if the alarm is activated more than three times in one hour.
5.2.3 Maintenance alarm
After using your appliance for some time, the alarm symbol may appear on your screen, but the appliance will
continue to operate as usual.
Checking the alarm code meaning ( see “5.2.1 Displaying the alarm code on the screen”, page 26), you may get the
alarm code “A07”. This alarm code signals that your appliance is due for a maintenance check on the 6 subsystems :
• Fan.
• Compressor.
•
Air heating (optional).
• Humidity sensor.
• Air blowing sensor.
• Defrost sensor.
We recommend that you contact an authorized technician within a month to do the necessary maintenance checks to
maintain the long lasting operation of your appliance.
Only a qualified technician may check on the appliance to reset the maintenance alarm.
EN