background image

21

3.4.2 Unlocking the keyboard

If the “Lock keyboard” option is activated, when no key has been pressed for 10 seconds, the keyboard automatically 

locks.

When a key is pressed, “LOC” is displayed.

To unlock the keyboard:

• 

Press and hold down (longer than 3 seconds) one of the following keys: 

 or 

SET

.

• 

“ULOC” is displayed after the screen is unlocked.

3.4.3 Configuring setpoint temperatures

• 

Press and hold (longer than 3 seconds) 

SET

.

•  Browse with the 

 or 

 keys until you reach the “USER” menu, then press 

SET

 to validate.

•  Browse with the 

 or 

 keys until you reach the setting to change (refer to the “Information: list of setpoint 

settings” heading below) then press 

SET

 to validate.

• 

Set the setpoint to the chosen temperature using the 

 or 

 keys, then press 

SET

 to confirm.

•  Press 

 to go back to the previous screen. 

Press 

 a number of times to return to the home screen.

Information: list of setpoint settings

Setting

Description

P4

Dehumidification setpoint

P7

Heating setpoint

P66

Heating setpoint (handling the automatic shutter mode)

EN

Содержание WD002088





































Отзывы: