![background image](http://html1.mh-extra.com/html/zodiac/voyager-re-4100/voyager-re-4100_installation-and-user-manual_4121723012.webp)
10
2.5 I Starting a cleaning cycle
• Do not use the appliance if the roller shutter is closed.
•
The control box switches to standby after 10 minutes. Press any key to exit standby mode. Standby mode does not
stop the appliance if it is in a cleaning cycle.
2.5.1 Choice of cleaning mode
•
The cleaning mode defines the surface to be cleaned and the duration of the cleaning cycle (depending on the model).
•
By default, a cleaning mode "
Floor + walls + water line
" is pre-configured. A blue LED indicates the chosen mode.
•
The cleaning cycle can be modified before the appliance starts or while it is operating. The previous cycle stops. Press
to start a new cycle. The remaining time from the previous cycle will be reset.
•
For dual-filtration models, launch several cycles without the very fine debris filter to pre-clean
the pool.
•
Press
(depending on the model)
Surface to be cleaned
Floor only
Floor + walls + waterline
2.5.2 Launching the cleaning cycle
•
Press
The cleaner adapts its movement strategy to the cleaning mode, in order to optimise its level of coverage.
Tip to improve cleaning performance
At the start of the bathing season, launch several cleaning cycles in bottom only mode (after removing the
large debris with a net).
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the filter less clogged.
Содержание VOYAGER RE 4100
Страница 2: ......