Zodiac Vortex 3.2, Инструкция по установке и эксплуатации

Страница: 6 / 16

H03839
‐
00.B2 EN – 2013
‐
09
5
2.2 Vortex
™
3 4WD
2.3 Vortex
™
4 4WD
3. Use
3.1 Starting up the cleaner

When you connect the control box, the operating time for the selected cycle is displayed.

You can launch a cleaning cycle by pressing the "START / STOP" button.

The screen then displays the time remaining for the cleaning cycle, example : (Vortex ™ 3 4WD,
Vortex ™ 4 4WD).
*The selected cleaning cycle can be identified via the icons that are displayed
*The selected cleaning cycle can be identified via the icons that are displayed.
Concerning the pool shape, the cleaner will adapt its movement strategy depending on the choice in order
to optimise the coverage rate.
The pool cleaner is so efficient that it is not necessary to run more than 3 cycles per week
Surface area to be cleaned*
Bottom only
Bottom + sides + water line
Start / Stop the cleaner
Removal from pool mode
Display of the time
and setting the time
Navigation DAYS/HOURS/MINUTES selection
Confirm the selection
DAYS / HOURS / MINUTES
Cancels programming
Programming cleaning cycles
and setting the time
Surface area to be cleaned*
Bottom only
Bottom + sides (climbs the wall only 1 out of 4 times) + water line
Water line only
Start / Stop the cleaner
Removal from pool mode
Navigation DAYS/HOURS/MINUTES selection
Validate the selection
DAYS / HOURS / MINUTES
Cancels programming
Indication
"Clean filter"
Cleaning intensity*
Low intensity
Intensive
Pool shape*
Flat bottomed rectangular
Other shapes, other bottoms
Programming cleaning cycles
and setting the time
Display of the time
and setting the time