Zodiac V3, Инструкция по установке и эксплуатации, Страница: 2 / 16

H03818-00.A3 EN – 2012-03
1
• Read this manual carefully before installing, maintaining or repairing this device!
• The symbol indicates important information that must be taken into account in order to avoid risk
of personal injury and/or damage to the appliance.
• The symbol indicates useful information.
•
Exclusive use: pool water cleaning (must not be used for any other purpose).
Failure to comply with the following warnings can result in permanent injury, electrocution or drowning.
PREVENT ELECTRICAL SHOCK
To reduce risk of electrical shock:
• Connect unit to receptacle protected by a Ground Fault Circuit Interrupter (GFCI) or a Residual Current
Device (RCD) having a rated residual operating current not exceeding 30mA.
• While the control unit is water resistant, it is not intended for any type of sustained contact with water.
Therefore, it should be installed at least 3 .5 met ers from the inside wall of your swimming pool. Never
submerge the control unit.
• Be sure to follow all applicable local and national electrical and installation codes.
• The cleaner is for fixed installations only and to be used in conjunction with swimming pool equipment.
The cleaner is to be installed in accordance with the relevant requirements of the Australian wiring rules
AS/NZS 3000. Also refer to the installation instructions relating to the swimming pool equipment for which
the cleaner will be an integral part. The cleaner is to be supplied through a Residual Current Device (RCD)
with a rated residual operating current of 30mA.
• Do not enter pool while the cleaner is in water.
• Do not bury cord. Locate cord so as to prevent it from being damaged by lawn mowers, hedge trimmers
and
other equipment.
• To reduce the risk of electrical shock, do not use the cleaner or control unit if the cord is worn or damaged.
If the supply cord is damaged it must be replaced by the manufacturer or its service agent, or a similarly
qualified person in order to avoid a hazard.
• Double insulation — The cleaner utilizes a 'doubl e- insulated' construction which means that it is designed
such that it does not require a safety - connection to earth ground. For continued protection against possible
electric shock, use only identical replacement parts when servicing. Do not attempt repai r of the cleaner,
control unit, power cord, or floating cable.
• NEVER OPEN CONTROL UNIT.
• Do not use an extension cord to connect the unit to electric supply; provide a properly located outlet. The
control unit should be placed near the outlet box.
PREVENT CHILD INJURY AND DROWNING
• To reduce the risk of injury, do not permit children to operate this product.
• Do not let anyone, especially small children, sit, step, lean, or climb on any equipment installed as part of
your pool’s operational system.
Warnings