7
SELECTING THE RIGHT SALT TYPE
At start up it is necessary to select the correct salt type being used in the pool. If
using salt or using a mineral blended salt simply select the correct type as shown
on the screen once the unit is powered up.
1.Use
/
to scroll to the right selection
2. Press
to set the software to your preference
Note:
If the choice selected is wrong or you wish to change at any future time you
can reset the software and start again. This will clear all settings, time, timers etc...
To reset the software hold
/
at the same time then release, you should now
see the start up screen. The software has been reset.
