![background image](http://html.mh-extra.com/html/zodiac/sjn-960/sjn-960_user-manual_936254062.webp)
20
4. Press the MENU button, the normal screen is displayed.
Setting In/Out terminals
8. Press the MENU button to display the initial MENU.
9. Press the SHIFT
►
button to display the VCR MODE SETUP menu.
10. Press the SHIFT
▼
button to move the arrow mark (
►
) to In/Output Setup.
11. Press the SHIFT
►
button to display the IN/OUTPUT SETUP menu.
12. Press the SHIFT
▼
button to move the arrow mark (
►
) for the desired item.
13. Press the SHIFT
►
button to set “N/O” or “N/C”, “High” or “Low”.
•
N/O: Normally Open.
•
N/C: Normally Closed.
14. Press the MENU button three times, the normal screen is displayed.
Quasi-V SYNC
4. Press the MENU button to display the initial MENU.
5. Press the SHIFT
▼
button to move the arrow mark (
►
) to Q.V SYNK SETUP.
6. Press the sel (
►
) button unit for the appropriate system is selected. (ON -> OFF).
This function should be turned OFF with using the multiplexer.
(This function should be turned ON with not using the multiplexer).
Attention
In cue, rew state, noise bar could be happen with up and down.
o
The Recording Time data cannot be reset even though the reset button is pressed. If the RESET button is
pressed, all data ca be reset except the running time data
.
Содержание SJN-960
Страница 1: ...SJN 960 Videoregistratore Time Laps Time Laps Videorecorder Manuale D uso Users Manual ...
Страница 68: ...26 ...