19
3.3.4 Configuring the test mode
Once the installation of the dehumidifier is finished, the installer can check the appliance in test mode. This mode is
used to force the dehumidification functions (and the heating kit, if installed).
To activate/deactivate the test mode:
•
In the “EASY” menu, browse with the
or
keys until you reach the “P25” setting, then press
SET
to
confirm.
• Using the
or
keys, select:
- 0 = stop test mode (default settings)
- 1 = start test mode.
• Press
SET
to confirm.
• Press
to go back to the previous screen.
Press
a number of times to return to the home screen.
•
When the test mode is activated, the
symbol is displayed.
To set the test mode duration:
•
In the “EASY” menu,
browse with the
or
keys until you reach the “P26” setting, then press
SET
to
confirm.
• Using the
or
keys, choose the desired duration (in minutes). The default duration is 30 minutes. Note that
the duration must be set before running the test mode. Changes to this setting during the test will only be taken
into account later.
• Press
SET
to confirm.
• Press
to go back to the previous screen.
Press
a number of times to return to the home screen.
•
If the test mode is manually stopped prematurely ("P25" = 0), the
symbol remains on the screen
until “P26” has counted down.
Several checks can be performed in test mode:
•
Check that hot air is coming out of the appliance's blower grids.
•
Check that the following symbols are displayed:
Dehumidification
Heating
or
Depending on the test conditions, checking the condensate drainage is not mandatory.
Содержание SIROCCO 2 2M
Страница 12: ...11 2 4 I Access to the electrical connection terminal boards...
Страница 28: ...27 5 4 I Wiring diagrams 5 4 1 SIROCCO2 2M...
Страница 29: ...28 5 4 2 SIROCCO2 3M 5M EN...
Страница 30: ...29 5 4 3 SIROCCO2 5T...
