background image

1

 WARNINGS

GENERAL WARNINGS

• 

Failure to respect the warnings may cause serious damage to the pool equipment or cause serious injury, even death.

• 

The appliance is intended to be used only for swimming pools and spas; it must not be used for any purpose other than that for which it has 

been designed.

• 

It is important that the equipment is operated by competent and qualifi ed persons (both physically and mentally) who have previously received 

instructi ons for its use. Any person not meeti ng these criteria should not approach the appliance, in order to avoid exposure to dangerous parts.

• 

Keep children away from the equipment.

• 

The  appliance  must  be  installed  in  accordance  with  the  manufacturer’s  instructi ons  and  respecti ng  current  local  standards.  The  installer  is 

responsible for installing the equipment and for compliance with nati onal installati on regulati ons. Under no circumstances can the manufacturer 

be held liable in the including of failure to comply with applicable local standards.

• 

For other than the simple user-maintenance described in this manual, the product must be serviced by a qualifi ed professional.

• 

Incorrect installati on and/or use may cause serious damage to property or serious injuries (possibly resulti ng in death). 

• 

Any equipment, even carriage and packing paid, travels at the consignee's risk. The consignee should enter any reservati ons in writi ng on the 

carrier’s delivery note, if there is any evidence of transport damage (and confi rm them by recorded delivery lett er to the carrier within 48 hours). 

In the event of a device containing coolant fl uid that has been ti pped over, issue your reservati ons to the carrier in writi ng.

• 

If the appliance suff ers a malfuncti on, do not try to repair it yourself. Instead contact a qualifi ed technician for service.

• 

If the mains supply cable is damaged, it should be replaced by the manufacturer, its maintenance agent or other qualifi ed risk, to prevent any risk.

• 

Refer to the warranty conditi ons for details of the permitt ed water balance values for operati ng the appliance.

• 

Defeati ng, eliminati ng or shunti ng any of the safety features that may be a part of the device automati cally voids the warranty, as does the use 

of unauthorized, third party replacement parts.

• 

Do not spray insecti cide or any other chemical (infl ammable or non-infl ammable) in the directi on of the appliance, as this could damage the 

body and cause a fi re.

• 

Zodiac® Heat pump, fi ltrati on pump and fi lter appliances are compati ble with most commonly used pool water treatment systems.

• 

Do not touch the fan and/or moving parts or insert a rod or your fi ngers in the vicinity of the moving parts while the appliance is in operati on. 

The moving parts may cause severe injury, including death.

WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES

• 

The power supply to the appliance must be protected by a dedicated 30 mA residual current protecti on device, complying with the standards and 

regulati ons in force in the country where it is installed.

• 

Do not use an extension cord to plug the appliance into; plug it directly into a proper wall socket or outlet.

• 

Before carrying out any operati ons, check that:

 -

The voltage indicated on the appliance's informati on plate corresponds to the mains voltage, 

 -

The power grid is adapted to the power requirements of the appliance, and is grounded. 

 -

The plug (where applicable) is suitable for the socket.

• 

In the event of abnormal operati on or odours being released from the appliance, turn it of immediately, unplug it from its power supply and 

contact a professional.

• 

Before doing any work on the appliance, ensure that it, and any other equipment connected to the appliance, is switched off  and disconnected 

from the power supply and that the heati ng priority (where applicable) is deacti vated.

• 

Do not disconnect and reconnect the appliance to the power supply when in operati on.

• 

Do not pull on the power cord to disconnect it from the power supply.

• 

Do not att empt to carry out any service or maintenance with wet hands or while the appliance is wet.

• 

Clean the terminal block or power supply socket before connecti on.

• 

For any component or sub-assembly containing a batt ery: do not recharge or dismantle the batt ery or throw it into a fi re. Do not expose it to high 

temperatures or direct sunlight.

• 

In stormy weather, unplug the appliance to prevent it from suff ering lightning damage.

• 

Do not immerse the appliance in water (with the excepti on of cleaners) or mud.

SPECIFIC FEATURES APPLICABLE TO "Pool cleaners"

• 

The cleaner must operate in pool water with a temperature of between 15°C and 35°C.

• 

To avoid possible injury and damage to the cleaner, do not operate the cleaner out of the water.

• 

In order to prevent possible injury, bathing is prohibited when your cleaner is in the pool.

• 

Do not use the cleaner during shock chlorinati on.

• 

Do not leave the cleaner unatt ended for an extended period.

WARNING ON THE USE OF A CLEANER IN A POOL WITH A VINYL SURFACE: 

• 

Before installing your new cleaner, carefully inspect the lining of your pool. If the liner has eroded in some areas, or if you noti ce gravel, folds, 

roots or corrosion caused by metal on the inner surface of the liner, or if you noti ce that the support (bott om and walls) is damaged, do not install 

the cleaner before performing the necessary repairs or before replacing the liner using a qualifi ed professional. The manufacturer cannot be held 

liable in any way for damage caused to the liner.

• 

The surface of certain vinyl patt erned surfaces can wear rapidly and the patt erns disappear on contact from objects such as cleaning brushes, 

toys, infl atable buoys, chlorine distributors and automati c pool cleaners. The decorati on on some vinyl surfaces can be scratched or worn by basic 

fricti on such as through the use of a pool brush. The colours of certain patt erns can also be erased during use or when in contact with objects 

in the pool. The erased patt erns, wear or scratching of vinyl surfaces are not the liability of the manufacturer and are not covered by the limited 

warranty.

Recycling

 This symbol means that your appliance should not be disposed of with other rubbish. It will be selecti vely collected for the 

purpose of reuse, recycling or transformati on. If it contains any substances that may be harmful to the environment, these will 

be eliminated or neutralised.

 Contact your retailer for recycling informati on.

Содержание RV 5500 iQ



























Отзывы: