H0426500.B EN - 2015/02
9
5.3 Replacing the tracks
• Place the cleaner on its side
(1).
• Starting with one of the wheels, pull the inside of the track to separate it from the wheel
(2).
Then remove the track
from the cleaner.
• To install the new track, position the inside of the track on the first wheel's grooves
(3).
• Stretch the track around the second wheel, then around the last one. Press down on the track to position it correctly on
the wheel grooves
(4).
Make sure that the track passes under the guide.
2
1
3
4
5.4 Maintenance of your cleaner
• The cleaner must be cleaned regularly using clean or slightly soapy water, do not use solvents such as trichloroethylene
or its equivalent.
• Rinse the cleaner generously using clean water.
• Do not let your cleaner dry in the sun by the pool.
5.5 Recycling
This symbol means that you cleaner must not be thrown into a normal bin. It will be selectively collected for
the purpose of reuse, recycling or creating value. If it contains any substances that may be harmful to the envi-
ronment, these will be eliminated or neutralised. Contact your dealer for recycling information.
6. Troubleshooting
6.1 Meaning of the "control indicator" LED BLINKS
• If the
LED is off, the cleaner is operating normally.
• If the
LED is flashing, the cleaner is letting you know that checks must be carried out to improve cleaning and/or
resolve an error. See the table below.
PROBLEMS
SOLUTIONS
• Check that the cleaner is correctly connected to the control box. If nec-
essary, unplug it and reconnect it following the appropriate procedure.
• Check that nothing is stopping the brushes and tracks from turning cor-
rectly (sand, cable, etc.). To do so, raise the tracks to check that there
are no external elements jammed in a housing.
• Cleaner operating outside the pool. Make sure you start the cleaner
when it is in the water (see § 1.5).
• Check for the presence of pebbles or hair in the fan, if necessary clean
the filter.
