Zodiac PX50 MD12, Инструкция по установке и эксплуатации

Страница: 4 / 36

2
for operating the appliance.
• Deactivating, eliminating or by-passing any of the safety mechanisms integrated
into the appliance shall automatically void the warranty, in addition to the use of
spare parts manufactured by unauthorised third-party manufacturers.
• Do not spray insecticide or any other chemical (flammable or non-flammable) in
the direction of the appliance, as this may damage the body and cause a fire.
• Do not touch the fan or moving parts and do not place objects or your fingers in the
vicinity of the moving parts when the appliance is in operation. Moving parts can
cause serious injury or even death.
WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES
• The power supply to the appliance must be protected by a dedicated 30 mA Residual
Current Device (RCD), complying with the standards and regulations in force in the
country in which it is installed.
• Do not use any extension lead when connecting the appliance; connect the
appliance directly to a suitable power supply.
• If a fixed appliance is not equipped with a power cord and a plug, or any other means
for disconnecting from the power supply network with contact separation in all
poles allowing for complete disconnection in the event of category III overvoltage,
the instructions shall specify that disconnection means must be integrated into the
fixed wiring, in accordance with wiring rules.
• A suitable disconnection method, compliant with all local and national regulations
on category III overvoltage, and which disconnects all poles of the power supply
circuit, must be installed on the power supply circuit to the appliance. This
disconnection method is not provided with the appliance and must be supplied by
the professional fitter.
• Before carrying out any operations, check that:
- The voltage indicated on the appliance information plate corresponds to the
mains voltage.
- The power grid must be adapted to the power requirements of the appliance, and
is grounded.
- The plug (where applicable) is suitable for the socket.
• In the event of abnormal operation or the release of odours from the appliance,
turn it off immediately, unplug it from its power supply and contact a professional.
• Before servicing or performing maintenance on the appliance, check that it is
powered off and completely disconnected from the power supply. Moreover,
check that the heating priority (where applicable) is deactivated and that any
other device or accessory connected to the appliance is also disconnected from
the power supply.
• Do not disconnect and reconnect the appliance to the power supply when in
operation.
• Do not pull on the power cord to disconnect it from the power supply.
• If the power cord is damaged, it must be replaced by the manufacturer, its technician
or a qualified person to guarantee safety.
• Do not perform maintenance or servicing operations on the appliance with wet
hands or if the appliance is wet.
• Before connecting the appliance to the power supply, check that the connection
unit or socket to which the appliance will be connected is in good condition and